| Volume: | 0 to 2 litres |
| Container Construction: | Any |
| Operational Life (estimated): | 9-12 months |
| Leakage: | No leak under water |
| Pressure: | Limited to 1psi |
| Climate: | Northern Europe (Multiply desiccant by 3 for Tropical Climate) |
| Seals/Gaskets: | Nitrile Rubber (0.5 metre long – 1mm diameter) |
| Volumes: | |
| Up to 0.1 litres | Immersion Proof Breather BLD9036 |
| Up to 0.5 litres | Immersion Proof Breather BLD9290 |
| Upto 2 litres | Immersion Proof Breather BLD6693 & desiccant sachet BLD7410/01. |
N.B. An IPB is used where no desiccant can be fitted, this allows the equipment to breathe but will not allow liquid water ingress.
There is also an option to fit moisture adsorbing board where a desiccant sachet is too large.
Desiccator life assuming the equipment has been dry gas purged to remove hygroscopicity.
For Electronic Equipment silica gel desiccant is recommended.